ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ml310g5 server hotswap raid 1 - speed report 1.5gb

 
SOLVED
Go to solution
jack malusky
Occasional Visitor

ml310g5 server hotswap raid 1 - speed report 1.5gb

The new server we are building has the hot swap raid level 1 and we have configured all the drives and it works great - but when the server boots up the raid reports that the drives are at 1.5 instead of 3GB speed ? Why ? and is this correct ? The drives do not have the spped limiting jumper in place. Thanks It would be nice if the speed said 3.0 GB
1 REPLY
KarloChacon
Honored Contributor
Solution

Re: ml310g5 server hotswap raid 1 - speed report 1.5gb

HI


IF I am not wrong that was discussed here

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1268450

there is no HP controller that supports 3GB for SATA HDDs only 3GB for SAS HDDs

that's why
Didn't your momma teach you to say thanks!