HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ml350 and increasing raid 5 array

 
nik_3
Occasional Contributor

ml350 and increasing raid 5 array

ml350 with the smart array 532 controller installed. at the moment i have 3 x 18gb disk in a raid 5. windows 2000 sp4 with basic disc config with a c drive(system partition) and a e drive (data partition). i need to add another 18gb disk to the raid 5 array and make the e: as large as possible. do i have to change the disk to dynamic first? to get the disk to be part of the array do i just assign it to array A where the raid 5 logical drive is? any help would be appreciated