ml350 g5

[Ioannis Beveratos_1]

Hello...
I have an ML 350 g5 server who has a xenon 1.6 processor, I want to remove it and install a 2.5 quad core xenon, is there any possibility to have a conflict of for my system to stop working, making that change?

s/n: GB870554L0
PN: PID470064217

[Vulcan Maximus]

Hi,

No, there would not be any issues.But do update the BIOS to the latest and then add the new processor.Following processor are support with 2.5 GHZ.

Quad-Core Intel® Xeon® Processor E5420 (2.50 GHz, 80 Watts, 1333 FSB)

Quad-Core Intel® Xeon® Processor L5420 (2.50 GHz, 50 Watts, 1333 FSB)

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121586&prodNameId=3279711&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-e0d43d49df3c4be3b2709e8d3e ----- Online ROM Flash Component for Windows - HP ProLiant ML350 G5 (D21) Servers

Please let me know the results.


Regards,
Maximus

[Ioannis Beveratos_1]

Thank's for the fast relpy :) i'v orered the cpu, and i'll have it in my hands by the end of the week, i allso added 2+ gb of ram, when i'll istall them; i'll let u know about the result,

Jbe

[Ioannis Beveratos_1]

Today was my day!!!
I finally installed the new CPU, i removed the old one, put the new, replace the heat sink, and Iâ ve also installed 4 gb or ram, (pairs of2)
EVERYTHING went OK,
HP server boot up and it recognizes all the new hardware that i have installed..

Thanksâ again for your support!!

You are Pro! ;)