ml370 G3 how to reduce fan speed

[Danilo Giovini]

temperature condition are good, but all fans are at higest speed.

could you help me, the machine is under my table!!!

if I've to install some software , the let me know where to find it.

Thanks in advance.

[Sunil Jerath]

Hello Danilo,
You can change the setting of fans by going to F9 while booting. Also please make sure that you have the latest Support pack installed on the system. Here is the link in case you need it:

http://h18007.www1.hp.com/support/files/server/us/download/18416.html

Regards,

[Jeffrey Pogodzinski]

You need to install the hp insight management software -- it will turn down the fan speed after the computer boots up.

[Liu. Chung-Yuan]

Hi all,

At the same subject, if I install FreeBSD 5.2-Current on my ML370G3(P28), How do I slow down the fan speed.

Thx

[Danilo Giovini]

I've installed everything you've told me but it behaves in the same way....

Is there anything should I check?

Thanks in advance

[Marcello Ferraro]

I had the same pb with customers but with ML350 G3, after they upgrate the SPK, bios some were working well, other they had to change the systemboard

[Danilo Giovini]

Sunil,
the problem still remains...
I've updated the bios to the latest version, but i've found that "Advanced System Management Driver" is not installed.

So I've tried to install it but it tells me that "this software doesn't need to be installed on my system."
(HP Proliant Advanced System Management Controller Driver for Windows 2000 ver 5.32.2195.0)

My system is a Windows 2000 sp4 Italian.

If the system boot from the SmartStart Cd after loading some drivers the fan speed get normalized...... So the hardware is working properly but in Windows not.
Finally I think I need a driver for windows to setup correctly fan speed management.

Could anyone help me....

Thanks in advance

[Sunil Jerath]

Hello Danilo,
What is the fan speed set as in the BIOS?? You can check that by going in F9/Advanced Options/Default Fan Speed. Please try setting it to low and see if that helps.

Regards,

[Danilo Giovini]

The fan speed in bios is set to "normal"
(there is high and normal but not low)