cancel
Showing results for 
Search instead for 
Did you mean: 

msa60

 
michael oticha
Occasional Contributor

msa60

Hi everyone .
I have a new MSA60 storage connected to DL380 G6 server via hp smart array p212 controller . i am not able to see storage when i run ACU on the server where am I wrong ? See attached logs .

Thanks

Michael
4 REPLIES
Proliant Watch
Valued Contributor

Re: msa60

Below is the Error in the report

"Smart Array P212 in slot 2 The array controller is connected to an expander card or an external enclosure and is operating without a memory board. If there are physical drives attached to the expander card or external enclosure, and those drives contain any logical drives, then making any configuration change will lead to potential data loss on those logical drives. "
michael oticha
Occasional Contributor

Re: msa60

I need help on this . Storage is on but not detected by the server . I have connected the SAS cable in the rear left input port on the MSA and the connection to the server . My OS is win server 2003 small business .
Prasanth V Aravind
Trusted Contributor

Re: msa60

We (Michael & Me) had put this p212 card on another DL380 G6 server.. there it is working fine ....

what can be the issue ....


Regards
Prasanth
Prasanth V Aravind
Trusted Contributor

Re: msa60

This is the error we getting during server startup...

1746 - slot3 drive array unsupported storage connection detected -
SAS connection via expander is not supported on this controller model
access to all storage has been disabled. upgrage controller or detach
the expander based storage connection

Regards
Prasanth V Aravindakshan