ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

must press f1 to continue after reboot

 
Ayman Altounji
Valued Contributor

must press f1 to continue after reboot

I have a proliant 1600 with linux os after I reboot the computer when it starts it ask "press f1 to continue or f10 key for system partition utilities"
if I do not press f1 it will not continue with the rebooting and the computer will wait until pressing f1 . If someone knows how to make it start without pressing f1 and without formatting it I will be most thenkfull.
1 REPLY
Mark Cloutier
Respected Contributor

Re: must press f1 to continue after reboot

Go into the F10 partition. At the first screen press CTRL A this will bring up a dialogue asking about ADVANCED MODE. Press enter to agree. Go to Sys. Config -> config Hardware -> Review and Modify -> View and Edit Details. Hit PAGE DOWN twice and there you will see F1 Boot Prompt. Disable it by hitting ENTER and then save and exit.
We are here for a good time, not a long time!