ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

my DL380 will not power on

SOLVED
Go to solution
Eric_239
Occasional Visitor

my DL380 will not power on

there is a red LED in front of the riser board expansion slot and the server will not power back on the yellow light on the outside is on but the button does nothing. does any one know what this LED is for? or why it wont power up?
2 REPLIES
Doug de Werd
Honored Contributor
Solution

Re: my DL380 will not power on

youmight check to see if the riser board is seated properly. Open up the server and reset the riser board into the connector and see if this helps.

Thanks,
Doug
Expert in ProLiant Clusters
Eric_239
Occasional Visitor

Re: my DL380 will not power on

thanks for your help thats what it was.