ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

need Help!! DL360G3 redundant Power Supply

 
SOLVED
Go to solution
Markus Neunstöcklin
Occasional Visitor

need Help!! DL360G3 redundant Power Supply

one of our costomers needs to replace his built in redundant power supplies, in order to put another FC HBA in the System. Who can tell me what parts are needed to do so? I could not find an exact how to, on the partserver!
The only things I found out, are two Partnumbers (305442-001 PCI Riser Board and 305452-001 Hardware Kit Power Supply blank)!

Are these the right parts and do I need both?

Thanks in advance!
3 REPLIES
Stephen Kebbell
Honored Contributor
Solution

Re: need Help!! DL360G3 redundant Power Supply

Hi Markus,

I think you're right on both counts. You would need both. I checked the Maintenance and Service Guide, and they look like the correct spare parts.
http://h200002.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_293948-4/TPM_293948-4.pdf

Regards,
Stephen
Markus Neunstöcklin
Occasional Visitor

Re: need Help!! DL360G3 redundant Power Supply

Hi Stephen,

I hope this works, thanks for your quick response!!

Markus
Leon Rosier
Respected Contributor

Re: need Help!! DL360G3 redundant Power Supply

Also,

don't forget to put switch 4 back to its original position.

Leon