HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

need ILO-Software

 
manfredwl
Occasional Contributor

need ILO-Software

HI,

I just bought a DL380 G4 second hand and got the cover for ILO also shipped but without any Software. Where can I get the software because install-key e.g. is completely here.

 

Next: Is it possible to get the same ILO-Software also on ML370G2 and DL360G2??

 

Thanks for help.

4 REPLIES
PDP-Fan
Valued Contributor

Re: need ILO-Software

What software are you looking for? Firmware?

***********************************************
"If it seems illogical... you just don't have enough information"
manfredwl
Occasional Contributor

Re: need ILO-Software

quite right, because there's nothing "in the box" and to set up I believe I need the firmwere first.

PDP-Fan
Valued Contributor

Re: need ILO-Software

I still don't know what you wanna do...

 

To set up iLO the first time press F8 on the power-up screen after the iLO selftest is finished.

Set iLO default settings to erase eventually existing old settings

Set an IP address for the iLO

Set an Administrator password

save and exit

(if iLO prompts you for a password to access the setup screen.... set the "iLO security switch" on the mainboard to 1. Location of the switch is on the sticker inside the cover. Don't forget to reset the switch after setup is done)

 

Then use a web browser to access your freshly configured iLO. You can use a crossover cable to connect the network port and the iLO port for a quick test.

 

If you want to use the graphical remote console of the iLO, you will need a license to enable that feature. There are free trial licenses valid for 60 (or 90?) days.

***********************************************
"If it seems illogical... you just don't have enough information"
manfredwl
Occasional Contributor

Re: need ILO-Software

Thanks for quick help