ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

new graphic card

António Almeida
Occasional Visitor

new graphic card

Hi,

I have a Proliant 400 Pentium III 500 Mhz with Ethernet 802.3 Compaq NC3161 Fast Ethernet NIC.
I want put in AGP a Asus V9520 Geforce FX 5200 128 MB DDR AGP 8x, but when i conect and restart the pc, i hear many pi-pi and the pc not restart.
What i have to do?
1 REPLY
Sunil Jerath
Honored Contributor

Re: new graphic card

Hello Antonio,
Have you tried removing the AGP card and noticed if the server stops beeping. The AGP slot in the server supports AGP 4x only. If the beep goes away after removing the AGP video card then for sure it's telling you that it's not compatible. If it does not then something is not sitting in properly. Please make sure the RAM and CPU's are making proper contact. Also whenever a hardware change takes place in the COMPAQ/HP server you need to run System configuration. Please let me know the results. If you do need the system configuration utility that can either be run from the Smart Start CD or from the downloadable Utility.

Regards,