cancel
Showing results for 
Search instead for 
Did you mean: 

no POST

Ayman Altounji
Valued Contributor

no POST

I acquired a 5000 secondhand with no manual. When I try to boot up, I get power, but nothing else. No video, no beeps, the HDs dont spin up, nothing. I noticed on the board that the "PCI 3.3v" LED is not lit. What does this mean, and how do I fix it?
1 REPLY
Mark Cloutier
Respected Contributor

Re: no POST

firstly are you getting your fans spinning? if you are then make sure ALL cards and cables are seated..if so and still no go then the system board could be bad..if you arent getting fans spinning then it is either the power supply or power backplane board
We are here for a good time, not a long time!