cancel
Showing results for 
Search instead for 
Did you mean: 

no display

AHMED RAMADAN_2
Occasional Contributor

no display

Dear Sir
we have one server hp DL 380 g4for data storge.after the shutdow.the server couldn't start up agin (no disply ).I wnat to make this server to work as befor

please you help
2 REPLIES
sahnia
Advisor

Re: no display

Hi Ahmed,

Please reseat all internal components of the server, eg. memory, processor and PPM.
After reseating it should work as normal, if not then please check for any RED led on the system board and the explanation of that LED on the backside of the top cover that you have opened.

Take care

Aman
René Tessier
Occasional Advisor

Re: no display

Get the Motherboard changed, it happened to me yesterday.

If strage server, make sure original serial and product ID are entered in BIOS, if not you might have a HP NAS error and it will blue scrren your computer, no damage was caused by multiple blue screens as it is not windows that crash, but HP causing the error.