HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

no win2k option in SCU 2.58A ?

 
SOLVED
Go to solution

no win2k option in SCU 2.58A ?

Hello again, trying to install win2003 on a 5K, booted with the SCU version 2.58a (is this the latest ?), pressed ctrl A, however still no win2k option under "install o/s". What am I doing wrong ?
5 REPLIES
Sunil Jerath
Honored Contributor

Re: no win2k option in SCU 2.58A ?

Hello Yvar,
Yes 2.58A is the latest one. Surely Windows 2003 is not an option. To select Windows 2000 you have to select MS and then there is the option for it.

Regards,

Re: no win2k option in SCU 2.58A ?

it's not working, so step-by-step;
-boot
-press F10
-press ctrl-A
-enter on "operating system installation"
-choose ???

right.....

Re: no win2k option in SCU 2.58A ?

hmmm, when I select "configure hardware" in the SCU, then "review...", then "view or edit details", it already says Windows 2000 next to primary operating system !

so that should be okay ?

now where do I set the APIC mode to full table mapped ?
Sunil Jerath
Honored Contributor
Solution

Re: no win2k option in SCU 2.58A ?

Hello Yvar,
The APIC mode is under Advanced... When you go to system configuration - Control A - press page down twice after view and edit. Under Advanced you will see APIC MODE.

Regards,

Re: no win2k option in SCU 2.58A ?

yep, sure enough :-))

it was already set correctly, so I'm of installing win2003, let you know if all's well.

thanks again