HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

partition magic, raid 0+1 configuration

 
Awwadeen_1
Occasional Contributor

partition magic, raid 0+1 configuration

Dear all

I need to create new D partition on my proliant DL 380 G4 server by using partition magic software,
but I have raid 0+1.
my question is this cause any impact in raid configuration
2 REPLIES
Awwadeen_1
Occasional Contributor

Re: partition magic, raid 0+1 configuration

any assistance please
Matti_Kurkela
Honored Contributor

Re: partition magic, raid 0+1 configuration

If I understood your question correctly, and you're using the DL 380 G4's standard hardware RAID...

No, the changes in partitioning will not cause nor require changes in RAID configuration.

Partition Magic will see the logical disks as presented by the RAID hardware. As far as Partition Magic is concerned, the logical disks will behave just as if they were normal single disks.
MK