ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

partnr ..harddisk trays to ML370 (G1)

 
Robert Lindkvist
Occasional Advisor

partnr ..harddisk trays to ML370 (G1)

Hi have ML370 (G1) and I buyit harddisk tray 5,25 bay on the front,, the partnr I use is 113673-001 115170-001, but when I install this i must turn round the small plastic ribbon cover for montage the bigger ribbon cover cos the small plastic pigg dozen´t fit together with bigger cover, I wonder which partnr of trays I must use ...or is this right parts??

thanx Robe
7 REPLIES
Sunil Jerath
Honored Contributor

Re: partnr ..harddisk trays to ML370 (G1)

Hello Robe,
I know which tray you are talking about. That tray should work fine but you cal also try part no 247239-001.

Regards,
Robert Lindkvist
Occasional Advisor

Re: partnr ..harddisk trays to ML370 (G1)

thanx so much I will see if 247239-001 will work better or its same modell....thanx so much
Robert Lindkvist
Occasional Advisor

Re: partnr ..harddisk trays to ML370 (G1)

247239-001 Will ony fit Proliant 800 and professional Workstation 5000 and dozen´t have front tabs there u mounting screws haves no rails..
And I have this item cos I bought from Bason Computer them selling that 247239-001 and 113673-001 115170-001 a set so back to the question is 113673-001 115170-001 the right part for my ML370 (G1)server....thanx for all hel
Sunil Jerath
Honored Contributor

Re: partnr ..harddisk trays to ML370 (G1)

Hello Robert,
Yes that's the right part no. I have it installed here in my ML370.

Regards,
Robert Lindkvist
Occasional Advisor

Re: partnr ..harddisk trays to ML370 (G1)

Oki, did u turn a round the smaller plastic ribbon, with plastic pigg down, cos when I try to install that don´t fit in the screw holes...and did u mean partnr: 113673-001 115170-001?????

Regard Robe
Sunil Jerath
Honored Contributor

Re: partnr ..harddisk trays to ML370 (G1)

Hello Robert,
Both these part nos belong to the same part. That's what I am using and I did not bother to put the plastic on it since there is a cover on the front of ML370G1(Tower).

Regards,
Robert Lindkvist
Occasional Advisor

Re: partnr ..harddisk trays to ML370 (G1)

Well this parts belong togheter, lets say
113673-001 is ram holder and 115170-001 disktray, Yes is covers on the front of ML370 but this covers has screw holes but IF I try to montage this covers with this parts but dozent fit with screwholes and I must turn up and down the smaller ribbon cover on the front...

//regards Robert