cancel
Showing results for 
Search instead for 
Did you mean: 

pci error

 
Ayman Altounji
Valued Contributor

pci error

I had this message "PIC Bus parity error, PIC slot ?" on power up.
had to reset system twice before server started running.
I not sure why there's a question mark is there a problem with a card, or is it the pic bus on-board which is the problem?
1 REPLY
Ayman Altounji
Valued Contributor

Re: pci error

This is most likely a card (like an array controller) that has cache memory on the card. Check system configuration utility and see if the is a card that is not recognised properly (it might say PCI-PCI Bridge) or something similar.
Also start removing cards until the issue is resolved, but it should be a card with onboard memory
mark