power on button of ProLiant DL160 G6

[belli]

hi, it's just a sily question, but i realy dont find the power on button to turn on/off the new server...when i plugged the power cable it starts up directly, and when i needed to turn it of i didnt find the powe on button.
can u plz explain waht doens mean
Power Supply (Non-Hot Plug, Autoswitching)
thx

[TTr]

Service and maintenance guide page 94

That small switch on the fron upper right hand corner

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01728029/c01728029.pdf

There is no hard power button on the power supplies. There is stand-by power in the server when the power cord is plugged in. The power is needed for the iLO card.

[belli]

So the Power LED/switch is a SWITCH ?? so i have to click on the small power led to turn it on/off ?
so i have first to plug the power cord dirrectly to the wall outlet
and then clik on the small led to turn it on to boot form my CD.
i will try to boot form opensuse 11.2 Live Cd.
do you know if it will work. some people said that the NIC driver will not work for opensuse !
thx a lot

[TarunJain · Accepted solution]

Thanks Belli,
for giving us a chance to resolve your query.
Members are highly motivated by points so Please assign points to replies
http://forums13.itrc.hp.com/service/forums/helptips.do?#28

Let us know whether the open suse work for you or not?
If you need any other assistance regarding this server then open a new thread in respective category