HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

power on button of ProLiant DL160 G6

 
SOLVED
Go to solution
belli
Occasional Visitor

power on button of ProLiant DL160 G6

hi, it's just a sily question, but i realy dont find the power on button to turn on/off the new server...when i plugged the power cable it starts up directly, and when i needed to turn it of i didnt find the powe on button.
can u plz explain waht doens mean
Power Supply (Non-Hot Plug, Autoswitching)
thx
3 REPLIES
TTr
Honored Contributor

Re: power on button of ProLiant DL160 G6

Service and maintenance guide page 94

That small switch on the fron upper right hand corner

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01728029/c01728029.pdf

There is no hard power button on the power supplies. There is stand-by power in the server when the power cord is plugged in. The power is needed for the iLO card.
belli
Occasional Visitor

Re: power on button of ProLiant DL160 G6

So the Power LED/switch is a SWITCH ?? so i have to click on the small power led to turn it on/off ?
so i have first to plug the power cord dirrectly to the wall outlet
and then clik on the small led to turn it on to boot form my CD.
i will try to boot form opensuse 11.2 Live Cd.
do you know if it will work. some people said that the NIC driver will not work for opensuse !
thx a lot

TarunJain
Respected Contributor
Solution

Re: power on button of ProLiant DL160 G6

Thanks Belli,
for giving us a chance to resolve your query.
Members are highly motivated by points so Please assign points to replies
http://forums13.itrc.hp.com/service/forums/helptips.do?#28

Let us know whether the open suse work for you or not?
If you need any other assistance regarding this server then open a new thread in respective category