HPE Community
ProLiant Servers (ML,DL,SL)
1753901 Members
8776 Online
108810 Solutions
New Discussion

Re: power up problems

 
Ayman Altounji
Valued Contributor

‎01-08-2002 04:00 PM

‎01-08-2002 04:00 PM

power up problems

I have a proliant 5500 with 2 CPU's. I installed some additional RAM in it, but afterwards the machine will not power on. I have tried re-seating the RAM, and finally removing the new RAM but with no sucess.

The machine has power (PSU and system board AUX PWR leds are green) but the green led on the front stays dead. The system display is on displaying standard info. No fans run. Also the four LEDS cr50-cr54 are orange. cr29 is green.

Does anyone have any ideas ?

Thanks
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎01-22-2002 04:00 PM

‎01-22-2002 04:00 PM

Re: power up problems

Reseat the CPUs and those two little boards that go with them. Worked for me.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.