ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

problem - array on a proliant 3000 - netware 4.11

Scott Jungdahl_1
Occasional Visitor

problem - array on a proliant 3000 - netware 4.11

I lost a drive on a proliant 3000 running NetWare 4.11
I was contracted to migrate my company to newer technologies. Along the way i became an employee and also inherited the legacy stuff.

I lost a drive on the array and I need help finding the online 4.11 array config util for this Machine.
Load install shows the controller as a smart 3200.
Any help would be appreciated. It's been a while for me.
2 REPLIES
Oleg Koroz
Honored Contributor

Re: problem - array on a proliant 3000 - netware 4.11

Raj_75
Regular Advisor

Re: problem - array on a proliant 3000 - netware 4.11

You can load CPQONLIN.NLM. (If it is already installed.)

Otherwise you can down load and install Support Software for NetWare. But easier method would be to run the ACU from the Smart Start CD.