ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

problem con hp storageworks dat 72 hot plug

SOLVED
Go to solution
maurizio di salvo
Frequent Advisor

problem con hp storageworks dat 72 hot plug

thanks for all.

i need help because i have hp proliant dl 380 and controller raid 6i with two disk in raid 1 and also attached hp storage works dat 72 hot plug. the problem is the O.S. RED HAT ENTERPRISE LINUX 3 don't see the device tape.

where is the problem???
2 REPLIES
raadek
Honored Contributor

Re: problem con hp storageworks dat 72 hot plug

I think you should properly configure your cabling for duplex SCSI connection (i,e, separate bus for tape):
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReas
on=DocIndexPDF&prodSeriesId=397634&targetPage=http%3A%2F%2Fh20000.www
2.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00687567%2Fc0068
7567.pdf
'Embedded duplex SCSI cabling', page 59.

You will need the option below if your box does not have duplex backplane by default:

SCSI Configuration Kit
NOTE: Kit Includes duplex drive backplane terminator and 2 long SCSI cables.
[364471-B21]

Rgds.
Don't panic! [THGTTG]