problem usehuc109060css600 SAS drive on HP DL380 G7 server

[JAroJ]

Hello,

I buy huc109060css600 600 GB SAS drive and I would like use this in DL380 G7 server.
DL380 G7 use P410i RAID controller - but this RAID controller dont found this huc109060css600 SAS drive.
How can I use this huc109060css600 SAS 600 GB drive with P410i RAID controller ?

Thank 
Jaro

[FabioC1]

Hi  JAroJ 

This HD is 3rd part, don't have HPE firmware., because of this not recognize.

For this equipement recommended use this HDs in Quickspecs above.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04199811

[Jimmy Vance]

---

@JAroJ wrote:

Hello,

I buy huc109060css600 600 GB SAS drive and I would like use this in DL380 G7 server.
DL380 G7 use P410i RAID controller - but this RAID controller dont found this huc109060css600 SAS drive.
How can I use this huc109060css600 SAS 600 GB drive with P410i RAID controller ?

Thank 
Jaro

---

can you provide more information?

You've installed the drive in the proper drive carrier?

When running the array configuration utility, the P410i doesn't see an unassigned drive?

Are you just installing the drive and expecting it to show as available in the OS? 

[JAroJ]

Hello,

Exactly so  - When running the array configuration utility, the P410i doesn't see an unassigned drive

Next I buy other SAS HDD  - HUC156060CSS200. Only one difference is - this new is 15 K RPM.
This immediately - when I put this in the server I see this in the  array configuration utility, the P410i and can create new Logical drive.
First I see unassigned drives, ...
But with HUC109060CSS600 I see not any  unassigned drives

Regards
Jaro

[JAroJ]

Hello - but when I use HUC156060CSS200 (diffrence is on 15k RPM)  -  this work fine.

Regards
Jaro