HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

problem usehuc109060css600 SAS drive on HP DL380 G7 server

 
JAroJ
Occasional Contributor

problem usehuc109060css600 SAS drive on HP DL380 G7 server

Hello,

I buy huc109060css600 600 GB SAS drive and I would like use this in DL380 G7 server.
DL380 G7 use P410i RAID controller - but this RAID controller dont found this huc109060css600 SAS drive.
How can I use this huc109060css600 SAS 600 GB drive with P410i RAID controller ?

Thank 
Jaro

JaroJ
4 REPLIES
FabioC1
HPE Pro

Re: problem usehuc109060css600 SAS drive on HP DL380 G7 server

Hi  JAroJ 

This HD is 3rd part, don't have HPE firmware., because of this not recognize.

For this equipement recommended use this HDs in Quickspecs above.

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04199811

FabioC1 - HPE Pro

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
Jimmy Vance
HPE Pro

Re: problem usehuc109060css600 SAS drive on HP DL380 G7 server


@JAroJ wrote:

Hello,

I buy huc109060css600 600 GB SAS drive and I would like use this in DL380 G7 server.
DL380 G7 use P410i RAID controller - but this RAID controller dont found this huc109060css600 SAS drive.
How can I use this huc109060css600 SAS 600 GB drive with P410i RAID controller ?

Thank 
Jaro


can you provide more information?

You've installed the drive in the proper drive carrier?

When running the array configuration utility, the P410i doesn't see an unassigned drive?

Are you just installing the drive and expecting it to show as available in the OS? 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
JAroJ
Occasional Contributor

Re: problem usehuc109060css600 SAS drive on HP DL380 G7 server

Hello,

Exactly so  - When running the array configuration utility, the P410i doesn't see an unassigned drive

Next I buy other SAS HDD  - HUC156060CSS200. Only one difference is - this new is 15 K RPM.
This immediately - when I put this in the server I see this in the  array configuration utility, the P410i and can create new Logical drive.
First I see unassigned drives, ...
But with HUC109060CSS600 I see not any  unassigned drives

Regards
Jaro

JaroJ
JAroJ
Occasional Contributor

Re: problem usehuc109060css600 SAS drive on HP DL380 G7 server

Hello - but when I use HUC156060CSS200 (diffrence is on 15k RPM)  -  this work fine.

Regards
Jaro

JaroJ