ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

problem with SLES10 x64 on DL580

Henrik BOYE
Occasional Advisor

problem with SLES10 x64 on DL580

I have problem with SLES10 x64 installation on HP Proliant DL580 G4. After hardware initialization SLES installer does not respond on "initializing catalog" screen.
Software could not selected.
1 REPLY
Colin Topliss
Esteemed Contributor

Re: problem with SLES10 x64 on DL580

Did you select an install with no ACPI?

Also, are you trying the build remotely or on a locally attached console/keyboard? If its local, then try switching to the other screens to see if there are any error messages (). I had a similar problem with dodgy installation media (many I/O errors)!

Regards

Colin.