ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

problem with replace drive in smart array 641

grusticali
Occasional Visitor

problem with replace drive in smart array 641

Hello I have a problem with a ProLiant ML370 G4 server with smart array 642 controller

two weeks ago I noticed that a disk was reported as a failure
I tried to reinsert it seemed to be shared, but after a while there, and 'off without reporting any LED

I replaced the hard drive, I just added the new seemed to be shared, but after a while there, and 'off like the old without LED

 

the logical disk are raid5 with 3 disks connected

 

into insight diagnostics

the code state og the logical disk are=04

and the description is= "READY FOR RECOVERY", and all physical disks connected are detected and you can view all their parameters, speed, size, serial,etc

you have no idea what it is?
Thanks in advance

1 REPLY
Johan Guldmyr
Honored Contributor

Re: problem with replace drive in smart array 641

Hi, what do you mean with that a disk is 'shared'?

Run ACU - array configuration utility - and see what it says.
You can also look in ADU but it's a little complicated.
Start with the ACU and look for error messages.