ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

problems installing novell 4.11 on ML370 G1

Giuliano_8
Advisor

problems installing novell 4.11 on ML370 G1

hi, i want to install novell 4.11 on my ML370 G1, but i can't figure out which slot it uses for the intergrated network card, please help!

thx
4 REPLIES
Scott_59
Frequent Advisor

Re: problems installing novell 4.11 on ML370 G1

From what I know of the machine it has six PCI slots (four 64-bit and two 32-bit).

Depending on what kind of NIC card you have (probably 32 bit) use that slot

keep trying....

Scott
Giuliano_8
Advisor

Re: problems installing novell 4.11 on ML370 G1

i see! but it uses a intergrated network card.. so it's difficult to figure out the slot number..
JP Steeghs
Occasional Advisor

Re: problems installing novell 4.11 on ML370 G1

Hi Dutchie,
So, we meet again ...
Here's a listing of PCI slots on my ML370-G1:
PCI-Bus 0, device 1 (embedded): integrated UW-SCSI
PCI-Bus 0, device 2 (embedded): embedded HP-NIC (the network card you're looking for)
PCI-Bus 0, device 3 (embedded): ATI Rage (integrated video board)
PCI-Bus 0, device 4 (embedded): HP advanced system management controller
PCI-Bus 0, device 5 (PCI slot 1, 32 bits): whatever card you have there ...
PCI-Bus 0, device 6 (PCI slot 2, 32 bits): whatever card you have there ...
PCI-Bus 3, device 3 (PCI slot 3, 64 bits): whatever card you have there ...
PCI-Bus 3, device 4 (PCI slot 4, 64 bits): whatever card you have there ...
PCI-Bus 3, device 5 (PCI slot 5, 64 bits): whatever card you have there ...
PCI-Bus 3, device 6 (PCI slot 6, 64 bits): whatever card you have there ...

So, my embedded HP-NIC uses:
PCI-bus 0, device 2
Memory range: C6EFB000-C6EFBFFF
I/O range: 2800-283F
Memory range: C6D00000-C6DFFFFF
IRQ: 17
MAC-address is different for each card ...
Hope this helps you out, bye, JP



Cameron Todd
Regular Advisor

Re: problems installing novell 4.11 on ML370 G1

when you manually LOAD the NIC driver, shouldn't the command line ask for the port value and also list in brackets possible correct ones?
Values like 10001 or 10002 could be tried, although I am not real familar with the ML370.

Cameron.