progress status of array expansion with p800

[w2k3s]

I'm using P800 controller with MSA70, and i'm currently expanding my RAID6 array. does anyone know where I can find the progress status of the expansion?

I'm expecting it to take days because this is RAID6, but i'm just not sure if I can find out how it has been progressing in the expansion process.

[Graeme Bray]

You should be able to go into the Array Configuration Utility (or the HP system management homepage) and select the appropriate controller (P800) and then click Status and it will show the current percentage of the rebuild.

If you go to the homepage, you should be able to click the Array Controller, then scroll down on the left side with the drive listing and select the different logical drives and it will show you the status and percent.