proliant 7000 dead please help

[Drew Miller_3]

I need to reload the OS software, can only boot up from a floppy. When I select start with cd rom support it says "no cd rom found, driver not loaded".I will not recognize the the cd if I try to boot from the samrt start cd.I have tried 3 different cd rom drives and 2 new cables.I have replaced the STP board and still have the same problem.

[Girma Kassa_1]

Hi Drew,

I have few questions for you before providing any suggestion.

1. Is this Pentium Pro or Pentium ll/lll you are running?

2. Which part are you refering to STP board?

3. Have you clear Nvram via System Maintenance Switch 6?

Girma

[Drew Miller_3]

This is running 4 PIII xeon processors
STP board Im refering to is the board that the cd rom and floppy drives connect to also have video mouse and keyboard on rear.
I Have tried clearing nvram with switch six.

Thanks Drew