HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

proliant dl360 network card not working full duplex

 

proliant dl360 network card not working full duplex

I had 2 dl360 server instailled OS w2k advanced server,with sp2,the networke card driver is NC7781,both server connected to catalyst 2900-xl switch,the two cards appear not working full duplex on the switch port but all the ather ports is ok,is there any problem in the driver?from inside w2k OS all the config. is avalable ,I tried using auto or force 100full duplex but the problem still?
HASSAN
1 REPLY
Colin_29
Trusted Contributor

Re: proliant dl360 network card not working full duplex

Did you try forcing the ports on the 2900 to 100/Full as well. If you do this and the servers continue to communicate then its working.
The "show port" command on the 2900 will confirm the running configuration of each port.
If not try the drivers from http://h18004.www1.hp.com/support/files/networking/nics/Compaq_NC7781_Gigabit_Ethernet_NICs_WIN2000.html