ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

proliant dl380 server accessing the bios

jason_468
Occasional Contributor

proliant dl380 server accessing the bios

i got a proliant dl380r01 server pIII 667mhz i am trying to access the bios i need it to boot from cd. i have tried everything F10 F9 F8 i even booted it and pressed almost every button and still will not go into bios. it does not say what to press to enter setup or anything on the post screen. anyone konw how i can get into the bios on this server.
3 REPLIES
Oleg Koroz
Honored Contributor

Re: proliant dl380 server accessing the bios

if SCU not Installed you can't get access to F10, F10 it only gate to small Partition on the HDD, where all info Stored, or it could be stored in NVRAM
pick SS CD 5.5 or CSU and Firmware for Array if different than Integrated used SS CD
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=953940
jason_468
Occasional Contributor

Re: proliant dl380 server accessing the bios

i just downloaded the ss 5.5 iso and made a cd it still wont boot that. i put it in start up the computer and nothing it goes to the hard drive raid thing it found 1 drive. then it says press F1 to continou or F10 for system partion setup. i press F1 nothing happens i press F10 nothing happens. about 30 secons later it say sno system disk error thing.
Prashant (I am Back)
Honored Contributor

Re: proliant dl380 server accessing the bios

Hi,

try this
http://h18023.www1.hp.com/support/files/server/us/download/13227.html
It will do last not least

regards,
Prashant S.
Nothing is impossible