ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

proliant ml110 g5

 
nickowen
Occasional Visitor

proliant ml110 g5

I have added 4 x 2TB hard drives created a array, but the array is only seeing 2TB. Does this need a firmware or bios update?

I have read the specs and its says I can use 4x2TB

2 REPLIES
HPSDMike
HPE Pro

Re: proliant ml110 g5

Where are you only seeing 2TB? You said you created the array, how big does the array controller management utility say that the logical disk is? Did you put all four disks in a RAID5? 

I work for HPE. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
nickowen
Occasional Visitor

Re: proliant ml110 g5

Hi

I have inserted all 4 2TB hard drives they get picked up by the raid controller as all 4 x 2TB or 1862GB, but when I make a Raid0 it then only sees them as 750GB each so makes the array to 2TB only. Its the embedded raid controller on the board.