HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

"Drive Array Controller Failure (Slot 0)" error on DL380 G4

 
ynotravid
Occasional Advisor

"Drive Array Controller Failure (Slot 0)" error on DL380 G4

Errors (these errors were logged within 1min of each other:
1. "Drive Array Controller Failure (Slot 0)" - Insight Management Logs.
2. "Too Many runtime ECC errors on:
Array Controller in slot 1.
Controller restarted without SIMM." - Event Viewer

Server:
DL380 G4
2+1 72GB SCSI HDD's (RAID 1) attached to onboard SCSI (firmware ver 2.36)
4+1 300GB SCSI HDD's (RAID 5) attached to 6400 SCSI card

History:
3 months ago I had the battery on a 6400 SCSI card die; replaced it; things were good.
2 weeks ago HDD goes bad on onboard controller; replaced it; things were good for 2 days.
Now I am getting the two errors stated above.

Question:
I am starting to worry about this production machine. What more can I do to diagnose possible problems with the controllers on this machine? I found the errors in the logs but the Insight diagnostics tool reports no errors.
3 REPLIES
juan quesada
Respected Contributor

Re: "Drive Array Controller Failure (Slot 0)" error on DL380 G4

Hi,

Could you please Run an ADU report (Array diagnostic utility) and attach the *.zip file

Is to diagnose the Storage Subsystem

thanks
ynotravid
Occasional Advisor

Re: "Drive Array Controller Failure (Slot 0)" error on DL380 G4

Yeah, should've included this before...
KarloChacon
Honored Contributor

Re: "Drive Array Controller Failure (Slot 0)" error on DL380 G4