ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

"Server power restored - removed - reset" on DL380G6

kender
Advisor

"Server power restored - removed - reset" on DL380G6

Hi, on the DL380G6,
in the ILO-log, we have messages of "server power removed", "server power restored", "server reset"...
We've updated the ILo to 1.81.
I've seen this messages on different servers.
Has anyone a solution for this??


Here is an extract of the new server ilo-log:


Informational iLO 2 03/08/2010 15:25 03/08/2010 15:25 1 Server power restored.
Caution iLO 2 03/08/2010 15:25 03/08/2010 15:25 1 Server reset.
Informational iLO 2 03/08/2010 15:24 03/08/2010 15:24 1 On-board clock set; was 11/10/2009 18:23:56.
Informational iLO 2 11/10/2009 18:23 11/10/2009 18:23 1 License added by: Administrator.
Informational iLO 2 11/10/2009 18:21 11/10/2009 18:21 1 iLO 2 RBSU exited.
Informational iLO 2 11/10/2009 18:18 11/10/2009 18:18 1 Remote console started by:
Informational iLO 2 11/10/2009 18:18 11/10/2009 18:18 1 Power-On signal sent to host server by: Administrator.
Informational iLO 2 11/10/2009 18:18 11/10/2009 18:18 1 Server power removed.
Caution iLO 2 11/10/2009 18:18 11/10/2009 18:18 1 Power-Off signal sent to host server by: Administrator.
Informational iLO 2 11/10/2009 18:04
Informational iLO 2 11/10/2009 18:22 11/10/2009 18:00 4 Server power restored.
Caution iLO 2 11/10/2009 18:22 11/10/2009 18:00 4 Server reset.
Informational iLO 2 11/10/2009 18:00 11/10/2009 18:00 1 iLO 2 network link up at 100 Mbps.
Caution iLO 2 11/10/2009 17:59 11/10/2009 17:59 1 iLO 2 reset for Firmware upgrade.
Informational iLO 2 11/10/2009 17:59 11/10/2009 17:59 1 Firmware upgraded to version 1.81.
Informational iLO 2 11/10/2009 17:59 11/10/2009 17:59 1 Firmware upgrade complete.