ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

"Unknown" diagnostic LEDS on a DL380G4 system board

Leszek.Rzymowski
Occasional Visitor

"Unknown" diagnostic LEDS on a DL380G4 system board

Who knows, what these LEDs mean ? (attached view with arrow pointing to them).
There is no info in public acessible guides.

I have a symptom that DL hangs after booting SmartStart and when diagnostics is called.
LEDs named "IE" and "MC" are amber.

BIOS is P51 10/10/05
SmartArray fw 2.58
iLO fw 1.82

3 REPLIES
Brian_Murdoch
Honored Contributor

Re: "Unknown" diagnostic LEDS on a DL380G4 system board

Hi,

The debug led information is HP restricted however if it helps you identify your particular problem here is some additional information.

LED CR43 (IE) -Processor IERR P1-P2
LED CR46 (MC) -Machine Check Exception

I would hazard a guess that one of your CPU's is faulty. If the system originally had one CPU then remove CPU2 and test again.

Log a call with HP to check this out as your system will be on warranty. It may be a system board fault.

I hope this helps.

Brian
Scott_59
Frequent Advisor

Re: "Unknown" diagnostic LEDS on a DL380G4 system board

For future reference you can go to http://www.docs.hp.com and download the server maint and service guide. Pgs 99 + has some good information on systme boards LEDS.

Scott
Scott_59
Frequent Advisor

Re: "Unknown" diagnostic LEDS on a DL380G4 system board

For future reference you can go to http://www.docs.hp.com and download the server maint and service guide. Pgs 99 + has some good information on system boards LEDS.

Scott