ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

"hpssacli ctrl all show config" stuck

 
Highlighted
gmala
Occasional Contributor

"hpssacli ctrl all show config" stuck

I did a:

 

hpssacli ctrl all show config

 

on a dl380p g8 box running RHEL release 6.5.

 

The command simply stuck: I waited a couple of minutes without seeing

any output before hitting ctrl-c to terminate the task.

 

rpm say there are the following 2 packages installed:

 

rpm -aq | grep -i hpssa


hpssa-1.60-17.0.x86_64
hpssacli-1.60-17.0.x86_64

 

Firmware release of the  HP Smart Array P420i Controller is 5.42.

 

 Any help in understanding what's going on appreciated.

 

Thanks,

 

Giovanni

 

5 REPLIES 5
Jimmy Vance
HPE Pro

Re: "hpssacli ctrl all show config" stuck

what happens if you just run hpssacli? also mkae sure the 'sg' driver module is loaded

No support by private messages. Please ask the forum! Accept or KudoI work for HPE
gmala1
Visitor

Re: "hpssacli ctrl all show config" stuck

# hpssacli
HP Smart Storage Administrator CLI 1.60.17.0

 

.... nothing else ... stuck

 

For the sg module I did and lsmod, output follow:

 

lsmod | grep -i sg
sg                     29350  0

 

Thanks for helping.

 

Giovanni

 

 

Jimmy Vance
HPE Pro

Re: "hpssacli ctrl all show config" stuck

That is a pretty old version (Feb 2014) you might try a newer release 

 

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5212599&swItemId=MTX_66219ab8d27646d99c028ff389&swEnvOid=4103#tab-history

 

 

No support by private messages. Please ask the forum! Accept or KudoI work for HPE
gmala1
Visitor

Re: "hpssacli ctrl all show config" stuck

Well, the last release "fixed" the problem.

 

Thanks.

Jimmy Vance
HPE Pro

Re: "hpssacli ctrl all show config" stuck

You might want to look at the SDR (Software Delivery Repository) it allows you to add a repo file so you can keep all the HP software updated using yum

 

http://downloads.linux.hpe.com

 

No support by private messages. Please ask the forum! Accept or KudoI work for HPE