ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

raid help-proliant ML310 G3 server,

bob aol
Occasional Visitor

raid help-proliant ML310 G3 server,

i have a hp proliant ML310 G3 server, i am trying to install Server 2003 standard edition on it, it has 2 drives. i want to raid it to mirror or stripe which ever i can do. i do not know which drivers i need for the OS. i have installed the OS to one drive, disabled the embeded raid drivers in the BIOS then load the adaptec drivers to the OS, reboot enable the embeded raid and then i did a raid rebuild which took almost 2 days to do it did not work. the system booted up with a bunch of characters meaning the partiion is corrupted. what can i do to fix this. thanks
3 REPLIES
Michael A. McKenney
Respected Contributor

Re: raid help-proliant ML310 G3 server,

Which RAID controller are you using? Why did you install Adaptec drivers? Corrupted partition means either wrong drivers, faulty controller or a server board issue. Did you upgrade the firmware on the server to the latest revision? Are you doing hardware or software RAID?
bob aol
Occasional Visitor

Re: raid help-proliant ML310 G3 server,

this is an embeded hardware raid. thats why i am aksing what Raid drivers do i load to Server 2003 after installation. i tried adaptec didnt work it was the ones of the hp support page.
bob aol
Occasional Visitor

Re: raid help-proliant ML310 G3 server,

can anyone help please i need to locate the correct drivers for server 2003 OS so i can load the raid drivers for it. not sure which ones to use on the hp support site as there is 6 different ones.