raid proliant DL 320

[moreaux_1]

Hi,
One of two hard disks in the array is dead.
I replace the disk but at the start ot the server, the disk is recognized in an other array and in raid 0 in the place of raid 1.
The server is in production and i can't reinstall the softs.
I don't know how reconfigure my array without lost of my data.
I don't understand the Mega Raid Ide Setup Utility for reconstruction of the mirror.
Thank you

[Michael Richter]

Moreaux,
just delete the new Raid0 and then add the drive to the sparepool from the degraded Raid1
Rebuilt should start automatically.

Cheers
Mike

[moreaux_1]

How Can I sure taht it is good? Only at the start of the server?
When I delete the raid 0 and set in the sparepool, the sparepool is considered as a raid separate from the raid to rebuild. Is it normal?