HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

raid proliant DL 320

 
moreaux_1
Occasional Visitor

raid proliant DL 320

Hi,
One of two hard disks in the array is dead.
I replace the disk but at the start ot the server, the disk is recognized in an other array and in raid 0 in the place of raid 1.
The server is in production and i can't reinstall the softs.
I don't know how reconfigure my array without lost of my data.
I don't understand the Mega Raid Ide Setup Utility for reconstruction of the mirror.
Thank you
2 REPLIES
Michael Richter
Trusted Contributor

Re: raid proliant DL 320

Moreaux,
just delete the new Raid0 and then add the drive to the sparepool from the degraded Raid1
Rebuilt should start automatically.

Cheers
Mike
moreaux_1
Occasional Visitor

Re: raid proliant DL 320

How Can I sure taht it is good? Only at the start of the server?
When I delete the raid 0 and set in the sparepool, the sparepool is considered as a raid separate from the raid to rebuild. Is it normal?