ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

rebuild mirror sata raid ML310 Proliant

gerhard radstake
Occasional Contributor

rebuild mirror sata raid ML310 Proliant

How can I rebuild the mirror in a proliant ml310 server. A couple of days back the primary disk crashed but the system kept running on the secondary disk in the onboard sata raid.

After placing the new disk the server won´t startup because the mirror is not yet rebuild.

I went through the steps in the raid firmware but for unknown reason the new disk is not added to the raidset.

Also I know it´s a really old system and should be replaced but my client is happy with the system as it is and sees no need to replace just yet.

 

I am looking for a solution so the new primary disk is active again and the mirror is being rebuild.

 

2 REPLIES
gerhard radstake
Occasional Contributor

Re: rebuild mirror sata raid ML310 Proliant

Anyone out there with a possible solution for the raid issue?

Torsten.
Acclaimed Contributor

Re: rebuild mirror sata raid ML310 Proliant

ML310 - what generation?

Depending on the array controller in use you probably need to reboot and select an option during boot.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!