cancel
Showing results for 
Search instead for 
Did you mean: 

rebuild raid 1

cosimino
Occasional Visitor

rebuild raid 1

Which is the procedure to rebuild the logical raid1 volume after substitutioning one of the two HDs in a ML110 g5 ? (we use the embedded sata raid controller)
2 REPLIES
Mark Matthews
Respected Contributor

Re: rebuild raid 1

Try this...

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&swItem=MTX-64b379e59a804fe2a97da98a1c&prodNameId=3577715&swEnvOID=1005&swLang=8&taskId=135&mode=3

I'm presuming you're using Windows 2003 here...

Mark...

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
Daren Friday
Frequent Advisor

Re: rebuild raid 1

Mark,

Your link didn't work.

I am trying to replace the second drive in a mirror. Proliant ML110 G5 using the integral SATA RAID.

How do I do it?

Cheers

Daren