ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

recover raid and data on proliant 380 P server

 
Reda
Occasional Advisor

recover raid and data on proliant 380 P server

Hi 

 

i have 3 logical desks 2 * 420 SAS 3 inch disks 

the os were on the logical one 

 

i had a failed bay 1 on a raid 0 confirgation where the desk on bay 2 was damaged, i insterted more disks on logical 2 to try to extract the data into a safe lun 

 

any way to re-covery the raid configration or try to extact the data? i have tried may tools to boot into appliance but i failed any tool from hp or suggestion ?>

 

many thanks in advance 

 

 

4 REPLIES
Torsten.
Acclaimed Contributor

Re: recover raid and data on proliant 380 P server

You said you loose a disk from a striped RAID 0?

Consider you loose every second bit - no way to recover this RAID 0.


Replace the disk, create a RAID 1 or 5 and restore your data from backup.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reda
Occasional Advisor

Re: recover raid and data on proliant 380 P server

thank you, i have no recent backup, the desk is working now no way to recovery data ?
Torsten.
Acclaimed Contributor

Re: recover raid and data on proliant 380 P server

Did you really never made a backup of this RAID 0 ????

Running RAID 0 is a bad idea, no backups is worst, sorry.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reda
Occasional Advisor

Re: recover raid and data on proliant 380 P server

I am not sure about the old configuration really any way to restore the old raid configuration?

Thanks