redundancy Tab

[Jose Ch]

Hi,
I am setting up two Proliants DL389 G5 and one MSA500. Each server gets its own LUN, but with a double SCSI connection. Now I need Multipath to make one redundant connection, so I installed HP Multipath Adapter 2.20D. After the reboot I see the Multipath 'adapter' apear under SCSI devices in device manager. Searching the install guides, I now have to install the HP Proliant Smart Array Device manager extension for Windows 2000/2003, but with the last Smartpack 7.70A installation this was already done. So, I should have now a Redundacy tab on my HBA to configure Multipath. But there isn't one. Am I missing something? I hope someone can help, because I think it is only one tiny little thing...

Thanks!
Cees