repair hp prolaint ml110 g7 server from amber problem

[amka1]

this is what exatly my server do. won't boot, and shows amber light. pls view the link and see.  https://youtu.be/MJtjgWjaDj8

[AleksandraIsa]

Hello @amka1,

I see that the fan is not blowing and nothing happens when you press the power button. 

I guess the PSU or the SB has failed. 

If you have carepack, you may open a case. If the serevr is without warranty I would either suggest crosschanging the PSU with good one from other server or order spare part(s). 

[RR33]

Can you try booting with minimal config?(one processor, one memory DIMM and only the mother board - absolutely no PCI or HDDs)

[Tech_Aniket]

@amka1 

Hi

Thank you for Posting your query. I was unable to see any LED Indications on the server.

Please find the Recommendations below: 

1. If there is no LED on Power Button -

---A. If Power Supply LED is Green.

* Perform Minimum Configuration and check if the server boots. Use Different Processors and DIMMs to check.

* If the Server does not boot, the issue can be with System Board Or Power supply Backplane. 

---B. If Power supply LED is AMber/NO LED

* Replace the Faulty Power supply with a working Power Supply and check if there is any LED Indication when the power Button is pressed.

* If NO LED on Power Button, Check with Power Supply Backplane.

2. If there is amber LED on Power Button: 

* Perform Minimum Configuration and check if the server boots. Use Different Processors and DIMMs to isolate the issue.

Regards, 

Aniket (HPE)

[amka1]

hello sir,
pls. do you mean i should change my power supply unit.

[RR33]

Hi,

Have you tried any of the suggested troubleshooting steps?

If yes, please provide details.