HPE Community
ProLiant Servers (ML,DL,SL)
1752815 Members
6260 Online
108789 Solutions
New Discussion юеВ

replacing Prosignia 740 motherboard with onboard raid controller

 
SOLVED
Go to solution
Ian Bugler
New Member

тАО01-21-2003 06:48 PM

тАО01-21-2003 06:48 PM

replacing Prosignia 740 motherboard with onboard raid controller

I've just replaced the motherboard on a Prosignia 740 server. Is there a way to configure the onboard raid controller to recognize the existing Raid 5 array, without losing the data?
0 Kudos
Reply
2 REPLIES 2
Mark Cloutier
Respected Contributor

тАО01-22-2003 05:41 AM

тАО01-22-2003 05:41 AM

Solution

Re: replacing Prosignia 740 motherboard with onboard raid controller

Just to clarify.
The Prognia 740 does have an on-baord RAID controller. It's juts a normal SCSI controller.
If you are using a RAID controller then all you have to do is plug in the SCSI cable for your RAID 5 and at POST it should say New Logical Found.

Mark
We are here for a good time, not a long time!
Reply
Mark Cloutier
Respected Contributor

тАО01-22-2003 07:11 AM

тАО01-22-2003 07:11 AM

Re: replacing Prosignia 740 motherboard with onboard raid controller

Oops. I apologize. The 740 does NOt have a RAID controller.
We are here for a good time, not a long time!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.