ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

reset BIOS password on Proliant ML 110 Gen 10 server

dougoaten
Occasional Visitor

reset BIOS password on Proliant ML 110 Gen 10 server

Hi,

I acquired a used Proliant ML 110 Gen10 Server and nobody from the previous owner knows the setup password. The IT tech left the company and didn't leave much documentation

I just need the procedure for resetting the BIOS

Please help me!

Thanks

1 REPLY
active-Pro
HPE Pro

Re: reset BIOS password on Proliant ML 110 Gen 10 server

Hi ,

If you have access to the system physically you can Use the System maintenance switch (s5) located on the system board.
Once the Password is reset you can set the switch back to off.
S51 Off Off = Power-on password is enabled. (reg Page 69 for location of the switch)
On = Power-on password is disabled
ref to Page 71 of the Maintenance and Service Guide
http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00026236en_us-3.pdf



I am an HPE Employee.
Regards.

I work for HPE. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.