ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

resetting the integrated lights-out password

Michael Hum
Occasional Contributor

resetting the integrated lights-out password

Hi,
We recently replaced a defective Compaq DL380R G3 motherboard. The replacement part did not have a "tag" listing the Administrator password for the integrated Lights-out(iLO)board. Is there a proceedure to reset the iLO Adminstrator password?
Thank you,
Michael Hum
4 REPLIES
Oleg Koroz
Honored Contributor

Re: resetting the integrated lights-out password

From system Maintenance dipswitch enable SW#1 â flip your top Cover there is a label for iLO security settings, after all Changes Done you can set it back.
张辉_1
Honored Contributor

Re: resetting the integrated lights-out password

System Maintenance Switch ï¼ Switch # 1
Off = iLO security is enabled.
On = iLO security is disabledã
you can swtich to on>power on the server> F8 enter ILO setup>set password;then power down>swtich to off>is
张辉_1
Honored Contributor

Re: resetting the integrated lights-out password

5 : System maintenance switch
Jeff Brown_15
Frequent Advisor

Re: resetting the integrated lights-out password

I would just boot the server and at POST you will see "Hit F8 to enter ILO configuration". It will take you to the settings without using a password. Navigate to users and do what you do best.

Bam!