HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

server 2008 r2 and Proliant ML 110 G5

 
zereme
Occasional Visitor

server 2008 r2 and Proliant ML 110 G5

Hi,

I have a Proliant ML110 G5 and my question is:

Can i install windows server 2008 r2?

Are there certified hp drivers?

Thank you for your support.
1 REPLY
Trygve Henriksen
Respected Contributor

Re: server 2008 r2 and Proliant ML 110 G5

Yes, and yes.

Just make certain you have a decent amount of RAM in it.
Fast drives and a decent controller doesn't hurt, either. (I use P200 controllers in mine. You also need a cable assy 'Int 4Lane SAS/SATA' 457892-001)
If you install from DVD, you may find that the setup program can't read the DVD without loading a driver. I have no clue as to which driver works. I just plugged in a USB-based DVD-ROM...
(The CD/DVD drive in the server will be recognised by W2008R2 without problems. It's just the install system that doesn't like it)