server Queries

[Syed Abuzar Zaidi]

Dear Sir/Mam,



I have HP prolient ML350 G3 server ,I have upgraded my ram from 2GB to 4Gb after doing this my server become very slow comparitivli then 2 gb .Could you tell me that is problem . I have scanned my server with escam anti virus I did not get any virus in my server .

[KarloChacon]

hi

my recommendations are:

1. Clear NVRAM (see attached picture)

- Power down the server.
- Remove the server cover.
- Locate the System Maintenance(see attached picture), position 6, and move the switch to the "On=Clear NVRAM" position.
- Power the server back on until Power-On Self-Test begins.
- After POST has started, power-cycle the server off.
- Move the System Maintenance Switch back to the "Off" position.
- Replace the server cover and power on the system. The server will boot normally.

2. and apply latest firmware CD 8.0 booting server using this CD.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316537&prodNameId=3279705&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-6e09964448994337ad23016691

to update all components and mainly the System ROM

let us know results

regards