smart array 420i not detect my samsung ssd disk

[baber1]

hi

my server is hp dl 380G8  and my smart array contoler is p420i with latest firmware : 

these are all of my smart rray controler info :

Smart Array P420i in Slot 0 (Embedded)
   Bus Interface: PCI
   Slot: 0
   Serial Number: 0014380279DE940
   Cache Serial Number: PBKUD0BRH4Y2GU
   RAID 6 (ADG) Status: Enabled
   Controller Status: OK
   Hardware Revision: B
   Firmware Version: 6.68
   Rebuild Priority: Low
   Expand Priority: High
   Surface Scan Delay: 15 secs
   Surface Scan Mode: Idle
   Queue Depth: Automatic
   Monitor and Performance Delay: 60  min
   Elevator Sort: Enabled
   Degraded Performance Optimization: Disabled
   Inconsistency Repair Policy: Disabled
   Wait for Cache Room: Disabled
   Surface Analysis Inconsistency Notification: Disabled
   Post Prompt Timeout: 0 secs
   Cache Board Present: True
   Cache Status: OK
   Cache Ratio: 10% Read / 90% Write
   Drive Write Cache: Enabled
   Total Cache Size: 2.0 GB
   Total Cache Memory Available: 1.8 GB
   No-Battery Write Cache: Enabled
   SSD Caching RAID5 WriteBack Enabled: False
   SSD Caching Version: 1
   Cache Backup Power Source: Capacitors
   Battery/Capacitor Count: 1
   Battery/Capacitor Status: OK
   SATA NCQ Supported: True
   Spare Activation Mode: Activate on physical drive failure (default)
   Controller Temperature (C): 61
   Number of Ports: 2 Internal only
   Encryption Supported: False
   Driver Name: HP HPSA
   Driver Version: 5.5.0
   Driver Supports HP SSD Smart Path: False

now i put a ssd disk samsung dc on my server dik lights are on but in raid controller not detect ssd disk i have attached ssd disk info

now how can solve the problem?

best reards

[baber1]

please help me i have paid much money for this disk but now can not use that on this server

how can solve this problem?

[jbaptista81]

Have you already activated the SSD drive on Controller?