ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

smart array p400i and p800

h3ndr1k
Occasional Visitor

smart array p400i and p800

hi...i have problem with smart array p400 and p800 , i using server DL 380 G5,dual pro xeon , 4gb memory,two hdisk and conect with p400i ,my company have OS modified and when i'm install why my OS detect firt array is p800 not p400i?,the p800 conect to MSA ,so when OS boot always detect p800 first,i do update firmware...any ide solution for my problem?
4 REPLIES
TTr
Honored Contributor

Re: smart array p400i and p800

Check if the P400 is installed in slot1.
Matti_Kurkela
Honored Contributor

Re: smart array p400i and p800

I think there might be a BIOS setting that controls which SmartArray is booted from.

I'm not 100% sure, but the name of the setting might be "Boot Controller Order".

Press F9 after the p400i/p800 startup texts have cleared from the screen and there is just a few lines of text at the top of the screen (= just before the system attempts to boot the OS).

MK
MK
juan quesada
Respected Contributor

Re: smart array p400i and p800

yeap, in the RBSU (F9 during post) will be an option called boot controller order, just arrange the order of it as required
h3ndr1k
Occasional Visitor

Re: smart array p400i and p800

hi...all...
I do like your's say...but the result is same, i have three server like that...but when install not like that...HP support come to my office too and he say handsup for the problem and he say problem with the OS , but if problem with the OS why when we install to another server no have problem.